Imaging Products
Home Film Cleaner / Antistatic
Product Overview

Imaging Products
Contact Printers
Repro Cameras
Film Viewers
Film Cleaner
Spool Holders
Filters
Consumer goods

 

 Very High Efficiency Film Cleaner CLEAN-1000
Every handling and storage of films and film rolls is resulting with sedimentation of dust and particles. Any electrostatic charge on films, caused by the physical formation, will strongly increase this effect. Reduced printing and scanning quality as well as damages on emulsion or film substrate occur.
The film cleaner CLEAN-1000 has been specially designed for a very high efficient removal of dust and particles and neutralization of electrostatic charges from all types of films.
The assembled film is passing first a pair of smooth cleaning rollers and after a pair of accurate ionizer bars with an integrated air-knife. The cleaning rollers remove most of particles and dust. After the neutralization of electrostatic charges with the ionizer bars, the air-knife blows off any remaining dust.
The CLEAN-1000 is a stand-alone unit which is reliable and very easy to operate.
 
Features:
  • High efficiency ionizers
  • Integrated air-knife
  • Smooth cleaning rollers
  • Adjustable spool holders
  • Motorized film advance
  • Automatic stop at film end
  • Cost saving, no retouch
  • Prevention of film damage
  • Avoids information loss
  • Stand-alone unit
 Typical Applications:
  • Dust and particle removal
  • Electrostatic discharge
  • Film printing
  • Film scanning
  • Film treatment
  • Archiving


NEW! Protective cover available!

 
Specifications:
Two rollers with special coating, washable;
Air-knife with integrated pump;
Two ionizer bars;
Ionizing voltage 7…8kVolts ac;
Integrated high voltage supply;
Manual spool holders with adjustable width from 70-240mm and diameters up to 170mm;
Automatic film advance, forward;
Take-up side motorized;
Automatic stop at the film end
Speed approx. 50m per minute;
Alimentation 230V / 50Hz;
Dimensions 65x52x30cm (WDH).


 
Efficient Film Cleaning Unit CLEAN-2850 NEW!
The film cleaner CLEAN-2850 has been specially designed for a high efficient removal of dust and particles from all types of films and papers.
By turning the crank the film is passing a pair of smooth cleaning rollers, which remove particles and dust.
The CLEAN-2850 is a stand-alone unit which is reliable and very easy to operate.
 

Features:

  • Smooth cleaning rollers.
  • No brushes, no mechanical stress to films or emulsions!
  • Higher quality of images.
  • Time and cost saving reproductions and scans.
  • Prevention of film damage caused by micro particles.
  • Avoids information loss.
  • Stand-alone unit.

Applications:

  • Dust and particle removal
  • Film printing, reproductions
  • Scanning
  • Film maintenance
  • Archiving

 
Specifications:
For negatives, diapositives, glass plates, photo paper, Inkjet-foils, etc.;
Two cleaning rollers with a special coating, washable;
Roller width 28cm;
Crank for film transport;
Dimensions 42x16x13cm;
Weight ca. 2,3kg.
 
   

Statics Elimination NEUTRALIZER
The high intensity ionizer with high output neutralizes static from films and papers, film dryers, processors, automatic cutters, etc. Power supply 230V/50Hz.

Electrodes:
PE-300, electrode with 30 cm width, 1,5 m cable and fixture
 PE-600, electrode with 60 cm width, 1,5 m cable and fixture

Special models and adaptation to existing equipment on request.
 


All rights reserved. Specifications are subject of change without prior notice.
©2005 by Scanatron Technics AG